Which leaflet stand to choose: the short answer
Start with the size. An A4 leaflet stand is the most versatile choice: it takes A4 catalogues and brochures as well as smaller A5 and DL leaflets. If you hand out large catalogues, newspapers or maps, you need an A3 stand.
Next, decide whether the stand will travel. For trade shows, conferences and events, choose a folding model in a bag or carry case that you can set up in moments. For a reception, showroom or hotel lobby, choose a stable stand that will stay in one place for months.
Finally, match the material and look: clear acrylic shows off your covers, while steel copes well with daily use. Below we go through each of these choices and compare specific models.
Types of leaflet stand
- Folding floor stand in a bag or case — the Montana range in A4 and A3: the Montana brochure stand in a bag, the Montana brochure stand in a case and the Montana A4 SOLID in a polypropylene case. A good choice for exhibitions, roadshows and conferences.
- Steel floor stand — the Boston brochure stand, 137 cm tall, and the Atlanta A4 brochure stand, 143 cm tall. Both come with a carry bag, so they work in a reception area and on the road.
- Slim floor stand — the Columbia brochure stand (158 cm, 26×27 cm base) and the Lincoln brochure stand (145 cm, 23×28 cm base, with a carry bag). They fit where space is tight.
- Promotional counter with a leaflet holder — the Concord counter and the Dallas counter combine a service point with space for literature. One item to transport instead of two.
- Acrylic tabletop stand — small clear stands from A7 to A4 can show a price list, a menu, a QR code or a short notice next to your leaflets.
Leaflet sizes: A4, A5, DL and A3
Choose the stand size for the largest item you want to display. Smaller leaflets fit in a larger pocket; the reverse does not work. The A sizes are defined by ISO 216, and DL is the standard size for leaflets and envelopes.
| Size | Dimensions | Typical literature | Where to display it |
|---|---|---|---|
| A4 | 210×297 mm | catalogues, price lists, brochures | A4 stand: Montana, Columbia, Lincoln, Boston, Atlanta |
| A5 | 148×210 mm | flyers, event programmes, invitations | A4 pocket, where the leaflet sits lower |
| DL | 99×210 mm | leaflets, menus, A4 sheets folded in three | A4 pocket, two leaflets side by side |
| A3 | 297×420 mm | large-format catalogues, newspapers, maps | Montana A3, Dallas counter |
An A5 or DL leaflet in an A4 pocket is less visible because its top edge sits lower. Put your logo and headline at the top of the design. Two DL leaflets fit side by side in an A4 pocket, as together they are 198 mm wide. Read more about this format in our guide to the DL leaflet size.
Acrylic, aluminium or steel: what should the stand be made of
| Material | Advantages | Watch out for | Examples |
|---|---|---|---|
| Acrylic (plexiglass) | clear, so the whole leaflet cover is visible; light | scratches more easily; clean with microfibre, no alcohol | Montana, acrylic tabletop stands |
| Aluminium | light, does not rust, folds well | protect it from knocks in transit | Montana |
| Steel | rigid and stable, copes well with daily restocking | transport it in its bag to avoid chipping the finish | Boston, Atlanta A4 |
Montana stands are made of aluminium, acrylic and metal, and weigh from 4.8 kg for the A4 version in a case to 10.5 kg for the A3 version. The steel Boston weighs 4.3 kg and the Atlanta A4 6.6 kg, with bases of 28×39 and 28×37 cm respectively. For tabletops, choose acrylic stands: the Crystal, Prime and Platinum use 2 mm acrylic, while the Vista uses 5 mm, which makes it stiffer and gives it a more solid look.
Floor-standing leaflet stands compared
| Model | Size | Height | Base | Transport |
|---|---|---|---|---|
| Montana in a bag | A4, A3 | 146 / 148 cm | 25×35 / 46.5×37 cm | bag |
| Montana in a case | A4, A3 | 146–150 cm | 25×35 to 47×38 cm | case, silver or black |
| Montana A4 SOLID in a case | A4 | 146 cm | — | polypropylene case |
| Columbia | A4 | 158 cm | 26×27 cm | — |
| Lincoln | A4 | 145 cm | 23×28 cm | bag |
| Boston | A4 | 137 cm | 28×39 cm | bag |
| Atlanta A4 | A4 | 143 cm | 28×37 cm | bag |
Heights and dimensions come from the product pages. Check the number and layout of the pockets in the description and photos of the model you choose.

Leaflet stand Montana with bag
from €109.62 incl. VAT2 versions
In stock — ships in 1–2 business days

Leaflet stand Montana with case
from €140.24 incl. VAT4 versions
In stock — ships in 1–2 business days

Leaflet stand Boston
€113.30 incl. VATIn stock — ships in 1–2 business days

Leaflet stand Columbia
€158.01 incl. VATIn stock — ships in 1–2 business days
A stand for exhibitions or for reception
Trade shows, conferences and events
What matters here is weight, packed size and protection in transit. The Montana A4 in a bag packs down to 15×45×30 cm, and the case versions protect the acrylic from knocks in the car boot and the venue store. The SOLID polypropylene case stands up well to frequent travel. Place the stand at the edge of your booth so visitors can pick up a leaflet without stepping inside.
Reception, showroom and hotel
Here stability and appearance matter more. The steel Boston and Atlanta stand firmly on a wide base, while the slim Columbia and Lincoln fit by an entrance or in a narrow corridor. Choose one model and colour for every branch so your stands look consistent.
Promotional point
If staff greet customers and hand out literature, consider a counter with a built-in leaflet holder. The Concord is 101 cm tall with a 50×42 cm base and comes with a carry case. The Dallas holds 2×A4 or 1×A3 brochures and has a carry bag. You will find more counters in the promotional counters category.
Leaflet stands indoors or outdoors
Leaflet stands are designed mainly for indoor use: receptions, shops, exhibition halls and conference rooms. Outdoors, the problem is not just the stand but above all the paper. Damp makes leaflets curl, and wind blows them out of the pockets.
If you have to put leaflets out in front of a building, place the stand under cover, in a porch or a doorway, and bring it in at night. In strong wind, move it inside. On the pavement, an A-board with a poster and a QR code works better, and you can hand out leaflets from a counter in a gazebo or at the entrance.
How to place a leaflet stand so people take your literature
- On the visitor's path — at the entrance to your booth, next to the counter, by the till or in a waiting area beside the chairs. A stand tucked in a corner just becomes storage.
- The main offer at the top — put your key literature in the top pockets, at eye level, with supporting material lower down.
- One pocket, one topic — do not mix different leaflets in one pocket. The cover should be visible at a glance.
- Keep the pockets full — a nearly empty stand looks neglected. At a show, keep a box of spares under the counter and restock several times a day.
- A QR code alongside — an acrylic stand on the counter with a QR code to your online catalogue or contact form collects enquiries from people who do not take a leaflet.
You will find a full checklist for your booth in our guide to exhibition stand equipment, and tips on following up the contacts you collect in what to do after a trade show.
How to order leaflet stands
You will find all the floor-standing models in the brochure stands category and small tabletop stands under acrylic displays. The folding Montana stand in a bag costs from €109.62 incl. VAT. In-stock products ship within 1–3 working days across the EU, with a VAT invoice.
Fitting out several branches, a retail chain or an agency's equipment store? Send us a quote request and we will price a larger number of stands at B2B rates for businesses, agencies and resellers.
Frequently asked questions
Which leaflet stand size is the most versatile?
An A4 stand is the most versatile. It takes A4 catalogues, brochures and price lists, as well as smaller A5 and DL leaflets. Choose an A3 stand only if you hand out large catalogues, newspapers or maps. In our range, the A4 stands are the Montana, Columbia, Lincoln, Boston and Atlanta, and the Montana is also available in A3, in a bag or in a case.
Will DL leaflets fit in an A4 leaflet stand?
Yes. A DL leaflet measures 99×210 mm, so two fit side by side in a 210 mm wide A4 pocket. They are shorter than the pocket, though, so part of the design will sit behind the front panel. Put your logo and headline at the top of the leaflet, and if you mainly display DL, keep only one kind of leaflet in each pocket.
Which leaflet stand is best for exhibitions?
Folding Montana stands in a bag or case, in A4 and A3, work best for exhibitions. They are around 146–150 cm tall and pack down small, and the case protects the acrylic from knocks in transit. For frequent travel, the A4 version in a SOLID polypropylene case is a good choice. The steel Boston and Atlanta stands also come with carry bags.
Can I use a leaflet stand outdoors?
Leaflet stands are designed mainly for indoor use. Outdoors, damp ruins paper and wind blows leaflets out of the pockets. If you need to display literature in front of a building, place the stand under cover or in a porch, bring it in at night and move it inside in strong wind. On the pavement, an A-board with a poster and a QR code works better.
How much does a leaflet stand weigh?
Our floor-standing leaflet stands weigh from 4.3 to 10.5 kg. The lightest is the steel Boston and the heaviest the Montana A3 in a case. The Montana A4 weighs from 4.8 kg, the Columbia 5 kg, the Lincoln 6.5 kg and the Atlanta A4 6.6 kg. Acrylic tabletop stands are much lighter: the Vista A4 in 5 mm acrylic weighs 960 g, and the 2 mm models weigh even less.


