What you get with a ready-made exhibition stand
A ready-made stand is a set of parts from one display system, matched to a specific layout and floor area. In our range these are stands built from the LUNIX system: aluminium frames with a 12 cm profile, built-in LED lighting and fabric graphics with a 12x3 mm silicone edge. The frames go together without tools.
Instead of booking a stand builder before every show, you buy the structure once. For each event you take it along in its bags and simply change the graphics. We list the exact contents of each kit, including the number of walls, counters and lighting parts, on its product page. Product photos show sample artwork; design and printing are quoted separately.
Who a ready-made stand suits
It is most often chosen by companies with a regular calendar of trade shows at home and abroad, and by distributors who exhibit at several events each season. It also suits agencies handling several clients: one structure, with a different set of graphics for each event. Companies with a showroom use the walls between shows too, as a backlit brand backdrop in the office.
Stand layouts: corner, peninsula and island
The organiser allocates your space in a particular layout. That decides how many sides visitors can enter from and how many walls you need.
| Layout | Open sides | Sizes available | Price |
|---|---|---|---|
| Corner | 2, walls on two sides | 9 m² (3x3), 15 m² (5x3), 25 m² (5x5) | Request a quote |
| Peninsula | 3, wall at the back | 9 m² (3x3), 12 m² (4x3), 15 m² (5x3), 16 m² (4x4), 18 m² (6x3), 24 m² (6x4) | Request a quote |
| Island | 4, open on every side | 16 m² (4x4), 25 m² (5x5), 36 m² (6x6) | Request a quote |
The 6x4 m peninsula stand comes with one counter or with two counters. There is no kit for an inline stand open only at the front, but you can build one from individual walls, for example a LUNIX 300 or 400 cm wide with a Counter LUNIX.

Exhibition stand using LUNIX 9 m² (3x3) peninsula layout
Request a quoteRequest a quote

Exhibition stand using LUNIX 9 m² (3x3) corner layout
Request a quoteRequest a quote

Exhibition stand using LUNIX 16 m² (4x4) island layout
Request a quoteRequest a quote

Exhibition stand using LUNIX 18 m² (6x3) peninsula layout
Request a quoteRequest a quote
When a ready-made stand pays off
- You exhibit several times a year — compare the kit price with what you spend on stand builds over 2–3 years. With several shows a year a system usually works out better, because you pay for the structure once.
- Your stand size repeats — if you book a similar space every year, such as 9 or 18 m², one kit covers most of your events.
- You have people and storage — your own team puts it up without tools. You do need a van and dry storage, as single walls weigh 21–36 kg and travel in bags of about 48x28x132 cm.
- Consistent branding matters — the same stand at shows in different countries builds recognition.
- You want to stand out — backlit graphics catch the eye in a hall full of ordinary stands.
- You change your message often — new fabric is light, and swapping a silicone edge graphic takes minutes per wall.
How to work out whether a kit pays off
Add up the kit and graphics, add transport and storage, and divide the total by the number of shows you plan to use it at over 2–3 years. Compare the result with a stand builder's quote for a single event. If it comes out lower, the kit pays off. And after that time the structure is still yours to keep using.
When another option makes more sense
- A one-off show — consider hiring a stand or a simpler kit. A pop up stand, a counter and two roller banners come to from €671.88 incl. VAT.
- Stands over 36 m² or double-deckers — these need a custom design. System parts can still form part of it.
- Shell scheme from the organiser — some shows include basic shell scheme walls in the space price. Then graphics, roller banners and a counter are all you need.
- No storage space — a kit for a larger area means many bags of frames and graphics. Without a dry room, lighter fabric displays or a pop up stand are the better choice.
Ready-made stand, custom build or individual displays
| Criterion | Ready-made system stand | Custom stand build | Separate walls and counters |
|---|---|---|---|
| Set-up | your own team, no tools | the contractor | 1–2 people, about 15 minutes per item |
| Reuse | yes, with new graphics | often built for one event | yes |
| Changing the layout | modules join in other configurations | new design | freely |
| Look | consistent, backlit | anything you like | simpler |
| Transport | bags, van | handled by the contractor | cases, estate car |
| Starting budget | Request a quote | contractor's quote | from €671.88 incl. VAT |
In practice many companies mix these. The full stand goes to the main shows of the year, while smaller events and conferences get one or two walls and a counter from the same system. The brand looks consistent and you do not haul the whole kit to a small space.
For the full budget of a show, including space, power and transport, see how much an exhibition stand costs.
What to check before you buy
- Size and layout — compare the organiser's floor plan with the kit layout. Watch out for hall pillars and which sides will be open.
- Height limit — LUNIX walls are 250 cm high. If the rules allow taller stands, look at height extensions such as the Height extension for LUNIX 100/200/300x250.
- Power — LED lighting needs a power connection, booked through the organiser, and the right power supply for the system, such as the Power supply for LUNIX.
- Material rules — show technical regulations often require flame-retardant fabrics. Ask your printer for a certificate and keep it with you during build-up.
- Graphics — every wall has its own graphic size, listed on the product page. For backlit walls, order fabric made for use with LED lighting.
- Build-up time — the organiser sets build-up hours. Do a trial build at your premises so you know how long it takes and how many people you need.
Our trade show checklist covers the rest of your preparation.
How to plan a stand from a kit
The structure is only half the job. The other half is how you lay out zones and graphics. A simple split works best: a front area with the counter, a meeting area further in and a small store for bags, coats and stock.
- Front — place the counter close to the aisle, but not blocking the way in. Put your main message on the wall visible from the aisle.
- Upper part of the walls — place logos and headlines in the top half, above roughly 130 cm. People, furniture and the counter hide the lower part.
- One calm wall — keep it to a simple background and logo. It works as a backdrop for meetings, photos and video.
- Consistent colours — design all walls together as one graphic, not as separate posters.
For more layout ideas, see exhibition stand ideas.
How to extend a ready-made stand
- Extra counter — the Counter LUNIX with a 100x35 cm top, in the same system and with the same lighting.
- Product shelves — the Shelving system for LUNIX: each shelf takes up to 5 kg and the whole unit up to 15 kg.
- Screen — the Monitor/TV bracket for LUNIX for a monitor or TV weighing up to 16 kg.
- Header element — the Roof for system LUNIX, 100x250 cm and backlit, above the entrance or counter.
- Furniture and literature — cocktail tables from event furniture and a leaflet stand such as the Leaflet stand Montana with case.
An example of fitting out a larger space is in our 6x3 m corner stand example.
How to order a ready-made stand
You will find the kits in ready-made stands, and individual walls and counters in display walls and exhibition counters. In-stock items ship within 1–3 working days across the EU, with a VAT invoice. Businesses and agencies get B2B prices with a business account.
You can ask us about printing in a quote request or have it printed by any print shop. We list the graphic size with every product. If your space is a different size or you want to combine a kit with your own displays, send a quote request with the organiser's floor plan.
Frequently asked questions
What is included in a ready-made stand kit?
The kit contains LUNIX system parts matched to the layout and area: walls with aluminium frames and LED lighting, and in some versions counters too, for example the 6x4 m stand with one or two counters. We list the exact contents of each kit on its product page. Fabric graphics are not included in the price of the structure and are quoted separately.
How much does a ready-made exhibition stand cost?
Kits start Request a quote for a 9 m² peninsula, while a 36 m² island is Request a quote. On top of that, budget for graphics, transport, a power connection and the floor space itself. With several shows a year the structure is spread across many events. Our guide to exhibition stand costs breaks down the full budget.
Can a ready-made stand be set up in a different layout?
Largely yes, because LUNIX is modular. Connectors at 45°, 60° and 90°, plus T and X connectors, join walls at different angles, so the walls from one kit can often be rearranged. How far you can go depends on the number and size of the walls, so if you are planning a different layout, send us the floor plan.
How many people does it take to put up a ready-made stand?
Plan for at least two, as single walls weigh 21–36 kg and fitting the graphic on a large frame is easier with two. The frames assemble without tools. Build time depends on the size of the kit, so before your first show do a trial build at your premises and check you can finish within the organiser's build-up hours.
Can I use a ready-made stand outside trade shows?
Yes. Individual LUNIX walls stand on their own, so between shows you can use them in reception, a showroom, at a conference or in a shop as a backlit brand backdrop. The counter works at events and for guest registration. That way the structure earns its keep all year, not just for a few days at a show.

