Get ready for Black Week — 3 products for less right nowBefore Black Week Black Week starts in:
Since 1991Fast EU shippingVAT invoiceB2B prices
Prices
We help you choose: +48 22 113 14 16
EN · EUR — Language / Ship to / Prices

Language

Prices
Account

ComparisonRoller banners and display walls

Roller banner vs display wall: which is right for your stand?

Choose a roller banner when you need a light display up to 2 m wide that goes up in a minute. Choose a display wall when you want a full backdrop for a stand or stage. On many stands the best answer is both: a wall as the backdrop and one or two roller banners at the front.

8 min read

Three roller banners in a bright office lobby

Roller banner or display wall: the short answer

A roller banner is a single panel 80 to 200 cm wide. It weighs a few kilos, fits in a carry bag and goes up in a minute or two. It works as a supporting piece on a stand, a sign at the entrance, a reception display or a directional sign at a conference.

A display wall creates a seamless backdrop from 1 m to 6.5 m wide and up to 2.5 m tall. It takes longer to put up and the kit is heavier, but the effect is completely different: instead of a poster on your stand you have a proper build, with room for a counter, photos or a presentation in front of it.

If your stand is 2–3 m wide and you want your brand visible from across the hall, choose a wall. If space or budget is tight, or you change venues often, a roller banner will do.

Roller banner vs display wall compared

FeatureRoller bannerDisplay wall
Width80–200 cmfrom 100 cm (SEG frame) to 650 cm (Atlantis S fabric wall)
Height200 or 220 cm200–250 cm, depending on the system
Weight1.5–7.4 kgfor example from 2.1 kg (100 cm SEG frame) to 29 kg (3x4 pop up in a case)
Set-up1–2 minutes, one person, no toolslonger: frame plus graphic; larger walls are easier with two people
Transportbag roughly as long as the banner is widebag, case or podium case
Graphicone panel that rolls into the basefabric sleeve, panels, silicone-edged fabric or banner
Best forsupporting displays, receptions, signagestand backdrops, stages, photo walls
Pricefrom €22.96 incl. VATfrom €72.59 incl. VAT

Figures come from the product specifications in our roller banners and display walls categories. Prices show the cheapest variant in each group.

When a roller banner is enough

  • A small stand or tabletop — on a 2x1 m space or next to a conference table, a wall takes all the room, while an 85–100 cm banner fits to one side.
  • Frequent travel — a sales rep travelling to meetings by train will not take a 3 m wall. An 85 cm roller banner weighs about 1.6 to 2.7 kg.
  • Many locations at once — the same campaign in a dozen branches means a dozen affordable banners, not a dozen walls.
  • Information and directions — registration, room numbers, the day's agenda, sponsor logos at the door.
  • Receptions and lobbies — permanent information that stays in the same spot for months, for example on a Standard roller banner.

When a display wall is the better choice

A wall wins wherever you need a backdrop rather than a single poster: on an exhibition stand, behind a stage, at a press conference or as a branded photo wall. One continuous graphic looks far more polished than several banners lined up side by side.

Pop up display stand

A folding scissor frame with the graphic on panels or attached with hook-and-loop (Velcro). The straight POP UP display with case in a 3x3 configuration measures 274x230 cm when open, and the kit with its case weighs 25 kg. The lighter Velcro POP UP Straight 3x3 measures 226x229 cm and weighs 8.5 kg. We explain set-up in how to assemble a pop up stand.

Tension fabric display

The Atlantis straight display wall is a tubular frame made from Ø 32 mm profile, with a fabric graphic pulled over it like a sleeve. It comes from 250 to 590 cm wide, stands 230 cm tall, weighs 7–15 kg and is double-sided. The Versum banner wall adjusts from 110x92 to 240x240 cm and weighs 5.8 kg.

SEG frames and LED walls

The MEGA SEG display wall comes 100, 120 or 150 cm wide and 200 cm tall, weighing 2.1–3.2 kg. A fabric graphic with a 10x3 mm silicone edge strip is pushed into the frame profile. It is a good middle ground between a roller banner and a large wall. Backlit LED walls such as LUNIX or BACKLIGHT stand 250 cm tall and make the strongest impact in a hall.

We compare fabric and pop up walls in more depth in tension fabric display or pop up stand.

Five questions that settle it

  1. How wide is the backdrop? Up to 1.5 m, a roller banner or SEG frame will do. From 2.5 m, a wall is clearly the better option.
  2. How many events a year? For one event, keeping the spend down matters most; for several shows a season, impact and durability do.
  3. How will you travel? A roller banner goes on the train; a pop up stand in its case is really a job for the car.
  4. Who will put it up? Anyone can set up a roller banner in a minute. For a wall, allow more time before the doors open and ideally practise in the office first.
  5. Do you need photos? A branded wall is a ready-made backdrop for guest photos and social media. A roller banner is too narrow for that.

What it costs: a sample comparison

The dilemma is often several roller banners or one wall. Here is a sample comparison for a backdrop about 2–2.5 m wide, based on the cheapest variants and excluding print:

  • Two Standard roller banners — from €53.96 incl. VAT; about 2 m of backdrop, two separate graphics.
  • Three 85 cm Standard roller banners — from €80.94 incl. VAT; about 2.55 m of backdrop with two gaps between bases.
  • Velcro POP UP Straight 3x3 — from €151.12 incl. VAT; 226 cm of seamless backdrop.
  • Atlantis straight fabric wall 250x230 cm — from €145.66 incl. VAT; 250 cm of backdrop, graphic on both sides.

For a single event, banners can work out cheaper and are easier to transport. For regular exhibitions a wall looks better, and you can add banners later as supporting pieces. Printing is priced separately: you can ask us about it in a quote request or use any print shop. The graphic size is listed on every product page.

Better together: a wall and roller banners on one stand

On a typical 3x2 m stand, the wall carries your logo and main message while a roller banner at the entrance delivers the specifics: a new product, an offer or an invitation to a demo. The layout works because each piece has a different job. The wall says who you are; the banner says what you have for visitors today.

If your stand is open on two sides, place a banner at the corner, and by a busy aisle consider a double-sided model. We set out a sample kit with a counter and budget in sample 3x2 m exhibition stand. When choosing the banner itself, our comparison which roller banner to choose covers models from the Compact to the 200 cm Pro roller banner.

Common mistakes

  • Several banners instead of a wall on a large stand — there are gaps between the bases and the graphics rarely line up perfectly. For a backdrop wider than 2.5 m, a wall looks better.
  • A wall that does not fit the space — a curved pop up can be up to 95 cm deep. Check the stand plan before you order.
  • No transport plan — a pop up stand in its case weighs 25–29 kg. For train travel, a roller banner or a light SEG frame is a better fit.
  • One graphic for everything — a roller banner print will not fit a wall. Each system has its own size and often a different material.
  • A wall with nothing in front — a backdrop alone will not stop people. Add a counter or a banner with a concrete offer.

How to order

You will find roller banners in the roller banners category, and pop up, fabric and SEG walls under display walls. In-stock items ship within 1–3 working days, with a VAT invoice and fast delivery across the EU. Businesses and agencies get B2B prices with a business account.

Not sure what will fit your stand? Send the dimensions and type of event in a quote request and we will suggest a combination of wall and banners.

Frequently asked questions

Which is cheaper: a roller banner or a display wall?

A single roller banner is clearly cheaper: the simplest model costs from €22.96 incl. VAT, while the cheapest wall, the MEGA SEG frame, costs from €72.59 incl. VAT. If you need a backdrop 2–3 m wide, though, compare several banners with one wall. For regular exhibitions a wall gives a better result for similar money. In both cases the graphic print is priced separately.

Can several roller banners replace a display wall?

They can, especially for a one-off event or if you change venues often. Two or three roller banners side by side create a backdrop 2–3 m wide. There will be gaps between the bases, though, and the graphics rarely line up perfectly. If the backdrop needs to look like one surface, a pop up stand or a tension fabric display is the better choice.

Which wall works instead of a roller banner on a small stand?

On a small stand the MEGA SEG frame works well: 100, 120 or 150 cm wide and 200 cm tall. It weighs 2.1–3.2 kg, and a silicone-edged fabric graphic looks more refined than a roller banner print. Another option is the Versum wall, which adjusts from 110x92 to 240x240 cm and weighs 5.8 kg.

How much does a pop up stand weigh compared with a roller banner?

The straight POP UP display 3x3 with its case weighs 25 kg, and the 3x4 version 29 kg. The lighter Velcro POP UP Straight 3x3 weighs 8.5 kg. By comparison, an 85–100 cm roller banner usually weighs 1.6 to 3.2 kg, and the heaviest wide model in our range 7.4 kg. So a pop up stand in its case travels best by car, while a roller banner also goes on the train.

Read next

All guides